S355J2G3
S355J2G3 Grade Introduction:
these steel exhibits excellent corrosion resistance. This can be seen in a variety of severe environments. Both reducing and oxidizing environments are not an issue for these steels. They can even resist high levels of chemicals including the most harsh and toxic ones. Nitric, organic, inorganic, sulphuric, acetic, formic, chlorides, hydrochloric acid, and phosphoric acid show no impact on these steels due to their exceptional resisting abilities. Also, they are good to work in stress corrosion cracking, crevice, and pitting environments.
S355J2G3 Grade Application:
- Freight cars
- Transmission towers
- Dump trucks
- Cranes
- Trailers
- Bulldozers
- Excavators
- Forestry machinery
S355J2G3 Equivalent Grades:
EN 10025-2 |
Steel Number |
DIN |
BS 970 1983 |
GOST |
JIS |
AFNOR |
UNI |
S355J2G3 |
1.0570 |
ST52-3 |
150M19 |
17GS |
SM 490 |
E36-3 |
Fe 510 |
S355J2G3 Chemical Composition:
Element |
C |
Si |
Mn |
P |
S |
Cr |
Al |
Cu |
Content (%) |
0.20 Max |
0.55 Max |
1.60 Max |
0.035 Max |
0.035 |
0.30 Max |
0.30 Max |
0.45 Max |
Mechanical Properties:
Property |
Metric |
Condition |
Elastic modulus |
217 GPa |
@ 100 °C |
Elongation A |
17 – 22 % |
@ 20 °C |
Elongation A80 |
14 – 18 % |
@ 20 °C |
Elongation A80, transverse |
12 – 16 % |
@ 20 °C |
Elongation, transverse |
17 – 20 % |
@ 20 °C |
Poisson’s ratio |
0.29 [-] |
@ 20 °C |
Shear modulus |
75 – 80 GPa |
@ 20 °C |
Tensile strength |
450 – 680 MPa |
@ 20 °C |
Yield strength |
275 – 355 MPa |
@ 20 °C |
Physical Properties:
Physical Properties |
Metric |
Temp |
Density |
7.83 g/cm³ |
20 °C |
Thermal Properties:
Property |
Metric |
Condition |
Coefficient of thermal expansion α |
1.08E-5 1/K |
@ -100 °C |
Thermal conductivity λ |
37.6 W/(m·K) |
@ -100 °C |
Thermal diffusivity αdiff |
12.9 mm²/s |
@ -100 °C |